Link Download

 

This time around we are going to talk about lg-p920 power button jumper ways which is on our Title and headline, like always, when ever you have any question about all we post you have a right to drop your question and we will soon consider and reply you back, just feel free to drop your comment,

now the lg-p920 power button as show on the picture below is indicating you how to fix and repair faulty power button, if you look of the switch
very careful you will notices that the flex that connect the power button and the printed circuit board (PCB) is too short and easy to brake,





Now do not disturb your self trying to trace where the faulty is, just make a jumper from Right leg which is positive to those two resistors,
and then slot your battery and hit the power button. Wow this is unbelievable!! your smartphone now is working..../

If this did not helps you solve your problems, what you have to do next is to change those two resistors or replace with working one, if you tried this, still getting error just remove the both resistors and bridge them, and take a jumper as shown on the picture above,

I an very sure if thats the problem you are OK with that, if you pass the all steps still getting error, which is not a power button problem.


let me take you step by step on how to fix it
1. use your airgun normally called rework station or blower apply soldering past set your rework station like this; Air 5.6 and then hot 3.4, if you are using digital rework station hit the circuit board carefully and then let it become cool and insert a battery and power it again.

2. use any cleaning materials and clean the all circuit board area carefully, let it dry and try again.

3. replace the power IC.

4. replace Ram or Flashing IC.

If your tried to all process but your problem never solve that is to say GOODBY to your phone, the phone completely dead.
 

Hi guys let us look up the headline whos that say LG-Optimus-3D-P920-Charging-Solution-Jumper-Problem-Ways-Charging-Not-Supported
so many times i totally focus on charging ways solution because its the most important issue if your phone have charging way problem which
means your mobile phone can not charge through USB charging that dosnt make sens,
for some people the phone become useless.

So be cool and relax Today we going to talk or gives you people the tutorials about
LG-Optimus-3D-P920 charging problem and how to fix it after so-many trial some at last they give up.


HOW TO FIX THE PROBLEM?
 

like i use to say always; the mainly charging ways problems occur by so-many reasons listed below

1. water or any liquid substances.
2. over voltage charger
3. miss handle.

etc, now for LG P920 charging way you have to consider the two or tree things

1. charging IC which is namely as (U801) U801 Have four legs or soldering point, all you have to do now is this simple take the jumper
from each leg to those resistors shown in the below picture
NOTE: note that pcandmobilesolution.cf could note take any responsibility of the damage you made
make sure you have the experiences on the job or you already done it before.

Good luck.

Do not forget to share to friends on your social network,
Contact us at boythe57@gmail.com or drop your comment.
note that your comment is really help us to know that you are helpful.